VERKK 1.5 MM AIR SPRAYGUN R500 | PNEUMATIC AIR PAINT TOOL | CAN OPERATE AT LESS THEN 10 PSI AT THE NOZZLE CAP | LOWER VOLUME OF AIR CREAT A SMOOTH FINISH WITH MINIMUM OVERSPRAY | SAVING ON PAINT COST AND ENVIRONMENTAL HAZZARDS | STAINLESS STEEL NEEDL AND NOZZLE | GRAVITY FEED | WEAR-RESISTING | PRECISE AIR CAP SET | ALUMINIUM ALLOY CHROM PLATED

BRAND : VERKK
ITEM NO.: R500
TYPE OF FEED : GRAVITY
STANDARD NOZZLE : 1.5 MM
OPERATING PRESSURE : 2.0 - 3.5 BAR
PATTERN WIDTH : 180 - 280 MM
AIR CONSUMPTION : 3.0 - 3.9 CFM
PAINT CAPACITY : 600 CC

. SPRAYGUN CAN OPERATE AT LESS THEN 10 PSI AT THE NOZZLE CAP AS COMPARED TO HVLP WHICH OPERATES AT 10 PSI AT THE AIR CAP AND IS USUALLY PUSHED HIGHER
. LVLP SPRAYGUN USE OF LOWER VOLUME OF AIR FINELY ATOMIZES PAINT CREATING A SMOOTH FINISH WITH MINIMUM OVERSPRAY THIS MEANS VERY LITTLE OVER SPRAY WILL BE PRODUCED SAVING ON PAINT COST AND ENVIRONMENTAL HAZZARDS
. STAINLESS STEEL NEEDL AND NOZZLE ACCOMMODATE A VARIETY OF COATINGS
. PRECISE AIR CAP SET
. NEW VOLUME - PAINT VOLUME AND SPRAYING PATTERN ADJUSTABLENEW ERGONOMIC DESIGNED HANDLE FOR COMFORTABLE GRIP
. SOFT - SUPER-FINE MIST SUITABLE FOR ALL KINDS OF SURFACE
STAINLESS STEEL AND WEAR-RESISTING
. GRAVITY FEED
. ALUMINIUM ALLOY CHROM PLATED
. ALUMINIUM ALLOY OXIDATION HIGH HARDNESS ON THE SURFACE AND WEAR-RESISTING
Marketed by NAMSON TRADING GmbH, Frankfurt ,Germany
Made in china