PROXXON ENGRAVING DEVICE GE20 27106 HOLDS A MAXIMUM OF 14 LETTERS | THE LETTERING TO BE MILLED IS SCALED DOWN DURING TRANSFER | TRANSFER RATIO CAN BE FIXED AT 2:1, 3:1, 4:1 OR 5:1 BY SIMPLY ADJUSTING TWO SCREWS | MADE IN GERMANY

BRAND : PROXXON

ITEM NO.: 27106

ORIGIN : GERMANY

COMPATIBILITY : WITH STANDARD 20MM COLLAR FOR ALL MICROMOT DRILLING AND MILLING UNITS WHICH ARE EQUIPPED WITH STEEL COLLETS.

USES : FOR ENGRAVING LETTERS, NUMBERS AND INDIVIDUAL SHAPES ON METAL, PLASTICS, GLASS OR STONEWARE. FOR NAME PLATES, JEWELLERY OR VALUABLE MATERIALS. ALSO EASY TO MANUFACTURE MINIATURE, INDIVIDUAL SHAPES, ENGRAVINGS, CUT-OUTS AND OUTLINE SHAPES, EVEN IN SERIES, USING SELF-MADE TEMPLATES OR COMMERCIALLY AVAILABLE TEMPLATES (PLANTS, ANIMALS, COATS OF ARMS). TEMPLATE CONTOURS ARE PRECISELY TO BE FOLLOWED USING THE GUIDE MARKER (BALL HANDLE). THE WORK PIECE IS ALIGNED AND FIXED ON THE MOVABLE GUIDE BLOCK WITH CLAMPING JAWS (HERE MICROMOT CLAMPING JAW SET NO 24 256) OR A VICE.

INCLUDED : TWO SETS OF LETTERS FROM A TO Z, INCL. HYPHEN, FULL STOP AND SLASH (TOTAL 78 ITEMS), ONE EACH HX KEY 1.5 - 3 AND 5 MM AS WELL AS A HX (BALL HEAD) SCREWDRIVER 2.5 MM. COMPLETE WITH A COMPREHENSIVE INSTRUCTION MANUAL.

. GUIDE BAR (TEMPLATE HOLDER) HOLDS A MAXIMUM OF 14 LETTERS.

. TEMPLATE CONTOURS ARE PRECISELY TO BE FOLLOWED USING THE GUIDE MARKER (BALL HANDLE).

. THE LETTERING TO BE MILLED IS SCALED DOWN DURING TRANSFER.

. THE TRANSFER RATIO CAN BE FIXED AT 2:1, 3:1, 4:1 OR 5:1 BY SIMPLY ADJUSTING TWO SCREWS.