PROXXON 40 X 80MM THICKNESSER DH 40 27040 | CUTTER SPEED 6,000 RPM | MAXIMUM DEPTH OF CUT 0.8MM | FEED RATE 4.8M/MIN | VIBRATION-FREE | SMOOTH THICKNESSING OF SOFT AND HARD WOODS | MADE IN GERMANY

BRAND : PROXXON

ITEM NO.: 27040

ORIGIN : GERMANY

POWER : LOAD BEARING COMPONENTS ARE ALL MADE OF DIE-CAST ALUMINIUM, WITH MILLED SEATS FOR BEARINGS AND SPINDLES. 230V 200W. 50/60HZ

RPM : CUTTER SPEED 6,000 RPM

NOTE : MINUTE SPLINTERS CAN INFLUENCE THE USEFULNESS OF PLANED WOOD. PRECISION IS EVEN MORE IMPORTANT WHEN WORKING IN MINIATURE. THE THICKNESSER DH 40 ALLOWS CLEAN THICKNESSING AS FROM 1.0 MM MATERIAL IN COMBINATION WITH AN UNDER-LAYER AND DOUBLE-SIDED ADHESIVE TAPE.

CAPACITY : THICKNESSING UP TO 40 MM THICK AND UP TO 80 MM WIDE MAXIMUM DEPTH OF CUT 0.8 MM. FEED RATE 4.8M/MIN. TABLE LENGTH 232 MM

WEIGHT : APPROXIMATELY 8 KG

. THESE CHARACTERICS ARE ESSENTIAL FOR VIBRATION-FREE, SMOOTH THICKNESSING OF SOFT AND HARD WOODS.

. TRIPLE-SPINDLED TABLE (OF DIE-CAST ALUMINIUM, FLAT-MILLED) WHICH CAN BE ACCURATELY ADJUSTED TO 1/10MM BY HANDWHEEL (ZERO ADJUSTABLE).

. AUTOMATIC EVEN FEED WITH ANTI-KICKBACK DEVICE: THE KNURLED, SPRING-MOUNTED INFEED ROLLER TRANSPORTS EVEN IRREGULARLY SHAPED WORK PIECES.

. A RUBBER-COATED OUTFEED ROLLER PREVENTS MARKING THE NEWLY PLANED SURFACE.

. PRECISION PLANER BLOCK WITH TWO HSS PLANER BLADES.