Lubrication Equipments and Fuel accessories
GREASE KIT
MECLUBE AIR GREASE KIT SUITABLE FOR DRUMS 180-220 kg R=100:1 013-1104-B00 | MADE IN ITALY
MECLUBE AIR GREASE KIT SUITABLE FOR DRUMS 180-220 kg R=100:1 013-1104-B00 | MADE IN ITALY
MECLUBE AIR GREASE KIT SUITABLE FOR DRUMS 180-220 kg R=100:1 013-1104-B00 | MADE IN ITALY
Availability: In Stock
BRAND : MECLUBE
ITEM NO.: 013-1104-B00
ORIGIN : ITALY
RATIO : 100:1
WEIGHT : 15.870 KG
DIMENSIONS : H 126 X W 60 X L 60 CM
VOLUME : 0.088 M3
PACKAGES : 2 BOX
AIR-OPERATED GREASE KIT
GREASE KIT SUITABLE FOR DRUMS 180–220 kg
COMPONENTS :
ART.010-1035-000 AIR-OPERATED GREASE PUMP FOR STANDARD DRUMS :
WEIGHT : 6.9 kg
DIMENSIONS : PUMP : 305 MM - SHANK : 950 MM
VOLUME : 0.016
PACKAGES : 1 BOX
COMPRESSION RATIO : 100:1
MAX PRESSURE SUPPLY : 8 BAR
AIR CONSUMPTION : 190 L/MIN
AIR INLET CONNECTION : F 1/4” G
GREASE OUTLET CONNECTION : M 1/4” G
GREASE DELIVERY CAPACITY : 8 BAR 1000 G/MIN
NOISE LEVEL : 79 DB
SHANK DIAMETER : 30 MM
WEIGHT : 7.2 kg
POLYURETHANE SEALS
AIR-OPERATED PUMPS
FOR DRUMS WITH CAPACITY OF 180-220 kg
THESE PUMPS ARE SUITABLE FOR THE SUPPLY AT HIGH PRESSURE OF GREASES WITH VISCOSITY UP TO NLGI 2 AT SHORT AND LONG DISTANCES. THE OPERATING PRESSURE OF THE GREASE PUMPS HEREBY MAY VARY BETWEEN A MINIMUM OF 2.5 BAR AND A MAXIMUM OF 8 BAR. IN ORDER TO OPTIMIZE THE EFFICIENCY AND THE LIFE OF OUR AIR-OPERATED PUMPS, WE RECOMMEND TO USE FILTERED AND LUBRICATED AIR
ART.014-1056-030 LIDS FOR PUMPS WITH SHANK :
WEIGHT 5.14 kg
DIMENSIONS : LID : 600 MM - SHANK : 30 MM
Ø LID : 600 MM
FOR DRUMS 180-220 kg
OUTSIDE Ø : 550-600 MM
TYPE STANDARD
A HANDLE PROVIDES AN EASY FIT TO THE DRUM. IT KEEPS THE PUMP IN VERTICAL POSITION IN ORDER TO ASSURE A PERFECT WORKING
ART.014-1066-030 FOLLOWER FOR PUMPS WITH SHANK :
DIMENSIONS : PLATES : 590 MM - SHANK : 30 MM
WEIGHT : 5.05 kg
Ø FOLLOWER PLATES : 590 MM
FOR DRUMS 180-220 kg
INSIDE Ø : 540 - 580 MM
IT IS ADVISABLE TO USE ALWAYS THE FOLLOWER PLATE, IT IS VERY IMPORTANT WHEN THE TEMPERATURE IS LOW AND WHEN HIGH VISCOSITY GREASE IS USED. BECAUSE OF THE DEPRESSION CREATED BY THE PUMP, THE PLATE IS ATTRACTED TOWARDS THE
BOTTOM OF THE DRUM BY ATMOSPHERIC PRESSURE. IT PUSHES THE GREASE INTO THE PUMP AND AVOIDS AIR CAVITIES. IT ALSO REMOVES THE GREASE REMAINING ON THE WALLS, DOWN TO THE BOTTOM OF THE DRUMS.
ART.907-0102-040 GREASE HOSE :
CHARACTERISTICS : 2SC 1/4" M-F
PRESSURE : W.P. 400 BAR
BURST : 1600 BAR
LENGHT : 4,0 M
WEIGHT : 1.53 kg
ART.014-1081-000 GREASE CONTROL GUN WITH FLEXIBLE HOSE AND 4-JAWS COUPLING SWIVELLING JOINT :
LENGTH FLEXIBLE HOSE: 400 MM
SWIVELLING JOINT F 1/4”
WEIGHT : 1 kg
END FLEXIBLE HOSE