Product Image

AED 1650.00
Quantity: - +
Brand: MECLUBE Availability: In Stock Model No: MEC013-1102-000 Sold by: Golden Tools Tradnig LLC-D Expected delivery before:
Quantity: - +
Model No: MEC013-1102-000 Sold by: Golden Tools Tradnig LLC-D Expected delivery:

Bulk inquiries of this product

Click Here...

BRAND : MECLUBE
ITEM NO.: 013-1102-000
ORIGIN : ITALY
RATIO : 60:1
WEIGHT : 11.87 kg
DIMENSIONS : H 89 X W 32.5 X L 32.5 CM
VOLUME : 0,056 M3
PACKAGES : 1 BOX

AIR-OPERATED GREASE KIT
FOR DRUMS WITH Ø 260-320 MMDIMENSIONS

COMPONENTS :
ART.010-1005-000 GREASE PUMP :
DIMENSIONS : PUMP : 305 MM - SHANK : 480 MM
AIR-OPERATED PUMPS
POLYURETHANE SEALS
COMPRESSION RATIO 60:1
MAX PRESSURE SUPPLY 8 BAR
MEDIUM AIR CONSUMPTION : 130 L/MIN
AIR CONSUMPTION 130 L/MIN
AIR INLET CONNECTION F 1/4” G
GREASE OUTLET CONNECTION M 1/4” G
GREASE DELIVERY CAPACITY 8 BAR 1600 G/MIN
NOISE LEVEL 76 DB
SHANK DIAMETER 30 MM
SHANK LENGTH 480 MM
WEIGHT 4.9 kg
FOR DRUMS WITH CAPACITY OF 18-30 kg

THESE PUMPS ARE SUITABLE FOR THE SUPPLY AT HIGH PRESSURE OF GREASES WITH VISCOSITY UP TO NLGI 2 AT SHORT AND LONG DISTANCES. THE OPERATING PRESSURE OF THE GREASE PUMPS HEREBY MAY VARY BETWEEN A MINIMUM OF 2.5 BAR AND A MAXIMUM OF 8 BAR. IN ORDER TO OPTIMIZE THE EFFICIENCY AND THE LIFE OF OUR AIR-OPERATED PUMPS, WE RECOMMEND TO USE FILTERED AND LUBRICATED AIR

ART.014-1095-000 HANDLE FOR GREASE PUMP KITS :
WEIGHT : 0.9 kg
IT HAS TO BE APPLIED ON THE BUSHING OF THE LIDS

ART.014-1051-030 LIDS Ø 320 MM FOR PUMPS WITH SHANK Ø 30 MM :
Ø LID: 320 MM
FOR DRUMS 18-30 kg
OUTSIDE Ø 260-320 MM
WEIGHT 1.84 kg
TYPE STANDARD

ART.014-1062-030 FOLLOWER PLATES Ø 310 MM FOR PUMPS WITH SHANK Ø 30 MM :
Ø FOLLOWER PLATES 310 MM
FOR DRUMS 18-30 kg
INSIDE Ø 270 - 300 MM
WEIGHT : 1.27 kg

IT IS ADVISABLE TO USE ALWAYS THE FOLLOWER PLATE, IT IS VERY IMPORTANT WHEN THE TEMPERATURE IS LOW AND WHEN HIGH VISCOSITY GREASE IS USED. BECAUSE OF THE DEPRESSION CREATED BY THE PUMP, THE PLATE IS ATTRACTED TOWARDS THE
BOTTOM OF THE DRUM BY ATMOSPHERIC PRESSURE. IT PUSHES THE GREASE INTO THE PUMP AND AVOIDS AIR CAVITIES. IT ALSO REMOVES THE GREASE REMAINING ON THE WALLS, DOWN TO THE BOTTOM OF THE DRUMS.

ART.907-0102-040 GREASE HOSE :
CHARACTERISTICS : 2SC 1/4" M-F
PRESSURE : W.P. 400 BAR
BURST : 1600 BAR
LENGHT : 4,0 M
WEIGHT : 1.53 kg

ART.014-1081-000 GREASE CONTROL GUN WITH FLEXIBLE HOSE AND 4-JAWS COUPLING SWIVELLING JOINT :
LENGTH FLEXIBLE HOSE: 400 MM
SWIVELLING JOINT F 1/4”
WEIGHT : 1 kg
END FLEXIBLE HOSE

ALL GREASE GUNS ARE SUPPLIED FOR THE CONNECTION OF THE SWIVELLING JOINT ART.014-1091-000 OR THE TRIPLE-SWIVELLING
JOINT ART.014-1090-000

Review Image

This product has not been reviewed yet!