Hover to zoom
Disclaimer: Images are for illustration purposes only. Actual product appearance, colour, packaging, or accessories may vary slightly from the images shown.
BRAND : LICOTA
ITEM NO.: ATA-0294A
ORIGIN : TAIWAN
PIECES : 16
INCLUDES :
66mm/6F S64×A66.1 : 66mm (2-19/32) -6 flutes - 1 step Fiat (Punto,1.2) Renault (Clio 1.2 Express, Kangoo. Rapid. Twingo) etc ...
74/76 mm-15F 73.3/75.1 : 74 to 76MM (2-29/32" to 3") -15 flutes - 2 step Fits Fram, AC, Saturn, Opel, VW, Audi,
Mercedes, etc ...
76mm/8F S74×A76.3 : 76mm (3") - 8 flutes - 1 step Fiat (z.B. Marea), Lancia (z.B. Delta) etc ...
76mm/12F S74×A76.3 : 76mm (3") - 12 flutes - 1 step Fiat (z.B. Ducato, Scudo, Ulysee), Renault, (Megane. Laguna. Espace III.) etc ...
76mm/14F S74.14×A75.36 : 76mm(3")-14 flutes - 1 step. Fits Champion. Champ Lee, Purolator, Mopar, VW, Porsche, Mercedes, BMW, Audi, Toyota, Opel, etc ...
86mm/16F S87×A88 : 86mm (3-3/8") - 16 flutes - 1 step Volvo (S40, S60, S70, S80.) etc ...
86mm/18F S83.5×A86 : 86mm (3-3/8") - 18 flutes - 1 step VW. Golf. (MKIII. Tdi, passat Tdi,) Audi A6 Tdi, Renault (Clio. Rapid 1.9D Laguna. Safrane. Espace 2.1D.) Citroen, Peugeot, Renault, etc ...
92mm/10F S92.1×A94.4 : 92mm (3-40/64") - 10 flutes - 1 step. Fiat, Cinquecento Coupe. Croma, Fiat, Panda. Regata. Ritmo. Fiat, Seicento. Tempra. Tipo, Lancia (Beta. Dedra. Kappa. Monte. Carlo. Prisma. Thema. Trevi) etc ...
93mm/15F S91.5×A92.34 : 93mm (3-21/32") - 15 flutes - 1 step. Fits Casite, Champ, Champion, GM, Fram, Hastings. Purolator, Wix, Nissan, Volvo, Mazda, Audi, VW, porsche, Renault. etc ...
93mm/45F S91.3×A92.65 : 93mm (3-21/32") -45 flutes -1 step VW-Audi. (TDi 2.4, 2.6, 2.8L) etc ...
96mm/18F S95×A96.3 : 96mm (3-3/4") - 18 flutes - 1 step. Audi (A4 Tdi, VW passat 97 Tdi) Renault (Laguna 2.2D. Safrane 2.2D Espace 2.2D. R19 2.2D. Rapid. Megane. 1.9/2.1D.Tdi) etc ...
106mm/15F S105.5×A106.8 : 106mm (4-11/64") - 15 flutes - 1 step Fiat (Ducato 2.5D. Td) etc ...
108mm/15F S106×A107.2 : 108mm (4-8/32") -15 flutes - 1 step Volvo (C70. S70. V70. Tdi. TD) (850 Tdi. TD) etc ...
108mm/18F S107.2×A108 : 108mm (4-8/32") - 18 flutes -1 step Renault (Espace, Laguna, Master, Safrane, Traffic 2.4, 2.5, 2.8D, TD) etc ...
. 3 LEGGED OIL FILTER TOOL 63-102mm ADAPTOR 3/8" OR 1/2" SQUARE DRIVER TOOL.
. THESE CUP - TYPE FILTERS ARE MADE OF 7 & 16 GAUGE CONSTRUCTION AND ARE ABLE TO WITHSTAND UP TO 85 FT - LBS OF TORGUE
. CUP - TYPE DESIGN GRIPS LIKE A SOCKET MINIMIZING THE POSSIBILITY OF CRUSHING FILTERS
. FITS 3/8" OR 1/2" SQUARE DRIVE TOOL COATED WITH ELECTRO - BLACK OXIDE FINISH FOR PROTECTION AGAINST ROST
| Item Code | LICATA-0294A |
|---|---|
| Barcode | 4714247363182 |
| Brand | LICOTA |
The LICOTA ATA-0294A Professional Oil Filter Wrench Set is a versatile automotive servicing tool kit designed for removing and installing different types of spin-on oil filters. Featuring a selection of cup-type oil filter wrenches and a three-legged adjustable oil filter removal tool, this 16-piece set provides practical solutions for a wide range of automotive maintenance requirements.
Designed for professional mechanics and automotive technicians, the cup-type filter wrenches provide a socket-style fit around compatible oil filter housings. This design helps distribute gripping force around the filter, reducing the possibility of crushing or deforming the filter during removal.
The set also features an electro-black oxide finish for surface protection and is designed for use with compatible 3/8-inch or 1/2-inch square-drive tools. With multiple cup sizes and flute configurations, the LICOTA ATA-0294A is a practical addition to automotive workshops, garages and vehicle maintenance facilities.
An oil filter wrench set is used to remove and install oil filters during engine oil servicing and routine vehicle maintenance. Oil filters can become tightly fitted during operation, making them difficult to remove by hand. A dedicated oil filter removal tool provides additional grip and leverage to make the job easier.
The LICOTA ATA-0294A is designed to accommodate different oil filter dimensions and flute patterns. Its cup-type design fits over compatible filter ends, allowing the user to apply controlled turning force through a ratchet handle or another suitable square-drive tool.
The included three-legged adjustable oil filter tool provides another removal option for compatible filters within its specified gripping range, making this set useful for servicing different vehicles.
Check the oil filter diameter and flute configuration. Select the cup wrench that matches the filter housing correctly.
Choose the correct cup based on its diameter, flute count and filter profile. Ensure that it fits securely over the oil filter.
Attach the selected cup wrench to a compatible 3/8-inch or 1/2-inch square-drive ratchet or other suitable drive accessory.
Place the cup wrench fully over the oil filter, ensuring that the gripping profile engages correctly with the filter.
Turn the drive tool smoothly in the appropriate direction. Follow the vehicle or filter manufacturer's instructions for removal and installation torque.
For compatible filter shapes, use the three-legged adjustable tool within its specified gripping range of 63–102 mm. Position it securely before applying turning force.
Always select the correct cup diameter and flute pattern. Avoid excessive force that could damage the filter housing. When installing a replacement oil filter, follow the vehicle or filter manufacturer's specified installation procedure and torque requirements. Never assume that the removal tool's maximum torque rating is the correct installation torque.
Provides a selection of cup-type oil filter wrenches and additional removal accessories for different servicing requirements.
Fits over compatible oil filters like a socket, helping distribute gripping force and reducing the possibility of filter crushing.
Includes different cup diameters and flute configurations to accommodate various compatible oil filters.
Designed for use with compatible 3/8-inch or 1/2-inch square-drive accessories.
Includes an adjustable three-legged oil filter removal tool with a specified gripping range of 63–102 mm.
Features a black oxide surface finish intended to provide protection against rust and corrosion.
Cup-type wrenches feature the specified 7- and 16-gauge construction for demanding filter removal applications.
The stated construction is designed to withstand up to 85 ft-lb of torque under the manufacturer's specified conditions.
The LICOTA ATA-0294A offers a practical combination of cup-type oil filter wrenches and an adjustable three-legged removal tool in one convenient collection. Rather than depending on a single universal oil filter wrench, technicians can select a cup that matches the filter's dimensions and gripping profile.
Its socket-style cup design helps reduce the possibility of crushing oil filters during removal. The electro-black oxide finish provides additional surface protection, while the compatible square-drive connections make it convenient to use with suitable workshop drive tools.
The LICOTA ATA-0294A is suitable for professionals and automotive service providers who regularly perform engine oil changes and oil filter replacement work.
It is used for removing and installing compatible automotive oil filters during engine oil changes and routine vehicle maintenance.
The LICOTA ATA-0294A is supplied as a 16-piece oil filter wrench set, comprising cup-type filter wrenches and additional filter removal accessories.
A cup-type oil filter wrench fits over the end of a compatible filter like a socket. Its gripping profile helps distribute turning force and reduces the possibility of crushing or deforming the filter during removal.
Yes. The set is designed for compatible 3/8-inch or 1/2-inch square-drive tools, depending on the cup or adapter configuration.
The included three-legged adjustable oil filter tool has a specified gripping range of 63–102 mm, making it suitable for compatible filter dimensions within that range.
The set includes different cup diameters and flute configurations designed for various filter applications. Compatibility depends on the actual filter diameter, flute count, profile and vehicle application. Always check the filter dimensions before use.
The electro-black oxide finish provides a protective surface treatment intended to help reduce rust and corrosion during normal workshop use. Proper cleaning and storage are still recommended.
The supplied product information specifies that the cup-type filter wrenches are designed to withstand up to 85 ft-lb of torque under the manufacturer's specified test conditions. This should not be treated as the recommended installation torque for an oil filter.
The cup-type design grips the compatible filter around its end, helping distribute the applied force and minimise the possibility of crushing compared with unsuitable gripping methods.
The LICOTA ATA-0294A oil filter wrench set is manufactured in Taiwan.
Equip your automotive workshop with the LICOTA ATA-0294A 16-Piece Cup-Type Oil Filter Wrench Set. Combining multiple cup-style filter wrenches with an adjustable three-legged removal tool, this versatile collection is a practical choice for professional mechanics, automotive technicians, garages and vehicle maintenance facilities.
No reviews yet. Be the first to review this product!
