Welding Machines
INVERTER WELDING
DECA MULTI PROCESS WELDING SYSTEM INVERTER MIG SYNERGIC TIG MMA JOB 523 LAB MADE IN ITALY DECA249300
DECA MULTI PROCESS WELDING SYSTEM INVERTER MIG SYNERGIC TIG MMA JOB 523 LAB MADE IN ITALY DECA249300
DECA MULTI PROCESS WELDING SYSTEM INVERTER MIG SYNERGIC TIG MMA JOB 523 LAB MADE IN ITALY DECA249300
Availability: In Stock
Welding current range (Amp): MIG/MAG, TIG: 10 - 200A
MMA: 10 - 160A
Duty Cycle (Amp) (EN 60974-1 40°C): MIG/MAG: (200A - 25%) - (140A - 60%)
MMA: (160A - 30%) - (130A - 60%)
TIG: (200A - 30%) - (140A - 60%)
Open circuit voltage (Volt): 85V
Input voltage (50/60 Hz): 1 Ph - 230V
Absorbed power 60% / Max: 3,0 / 6,0 kW
Fuse (Amp): 25A
Wire MIG MAN/SYN: :
Steel wire (Ø mm): Ø 0,6 - 0,8 - 1,0 mm (Sg2 Sg3)
Stainless steel wire (Ø mm): Ø 0,8 - 1,0 mm (AISI ER308 / ER316 / ER309)
Al.Mg wire (Ø mm): Ø 0,8 - 1,0 - 1,2 mm (5%)
Al.Si wire (Ø mm): Ø 1,0 - 1,2 mm (5%)
Cu.Si 3 - Cu.Al 8 wire (Ø mm): Ø 0,8 - 1,0 - 1,2 mm
Wire Suitable Spool: Ø 200 - 300 mm x 2
ELETCTRODES : :
Rutile: Ø 1,6 - 4,0 mm
Basic: Ø 1,6 - 4,0 mm
TIG: Ø 1,0 - 4,0 mm
Wire feeder: 4 rollers x2
Output connection: DX 25 mm2 / Euro
Thermostatic Protection: yes
Weight kg ≅: 48,5
Dimensions (mm): 860 x 560 x 1000
FEATURES: :
Synergic welding: MIG/MAG
Electronic inductor: MIG/MAG - Adjustable
Wire loading: MIG/MAG
Purge: MIG/MAG
2T / 4T: MIG/MAG
Burn back: MIG/MAG - Adjustable
Hot start: MIG/MAG, MMA - Adjustable
Wire approach speed: MIG/MAG - Adjustable
Arc Force (MMA): Adjustable
Anti-sticking (MMA/TIG): yes
TIG Lift (Torch with gas valve): yes
Spool Gun: MIG/MAG
Potentiometer torch: MIG/MAG Autosetting
Ammeter / Voltmeter: yes
SD Card reader: yes
Program saving: MIG/MAG: 16
LOGISTIC INFO CODE: 250400
Barcode: 8011399034288
Package dimension, Wid.-Dep.-Height (mm): 795 x 300 x 830
Package weight kg: 55.5
Pieces for pallet: 4
The JOB 523 LAB multiprocess inverter welding generator meets professional and specialist welding needs and is guaranteed by the LAB mark of excellence. Designed and built with care at our San Marino factories.
It allows to weld in Synergic MIG / Manual MIG / MMA / TIG Lift with great precision.
The JOB 523 LAB model is specifically designed for the needs of bodywork welding.
The control of the generator is very simple and intuitive. In a few steps you can set up the necessary work. A different welding program is assigned to each of the two torches. In this way the welding machine is ready for use with two different materials: for example, steel and alloy for copper silicon.
Each torch is connected to its own 4 roller wire feed unit, reel for wire spools with a diameter of 200 - 300 mm and up to two different protection gases.
The JOB 523 LAB is extremely flexible and easy to use: in synergic MIG mode over 50 programs are preloaded for welding many metals and alloys such as: steel, stainless steel, aluminum and brazing with copper silicon or copper aluminum wires, etc.
Through the SD card it is always possible to update and add new programs. The microprocessor memory also allows you to save customized programs as well.
JOB 523 LAB can also be used in MMA mode to weld rutile and basic coated electrodes and in TIG Lift mode it is perfect for precision work.
The structure of the generator is designed thinking of the needs of the coachbuilder and is treated in detail such as: support for the various torches, sturdy rubber wheels, etc.
The JOB 523 LAB model delivers 200 Amps in direct current. The power supply voltage is single-phase at 230 Volt.
The main features of the JOB 523 LAB are:
MIG
Robust 4 roller wire feeder diameter 37 mm for each torch.
Gas test function: to check the operation of the pressure reducer without advancing the wire.
Wire loading function: to easily load the wire into the torch without gas outlet.
Coil housing diameter 200 - 300 mm.
Synergic or manual regulation. Independent for each torch.
Preloaded programs for many materials.
SD Card Reader: to update programs and add new ones.
Personal program memory.
Simplified or advanced adjustment menu: to manage all available welding parameters.
Secondary MIG parameters
Inductance Adjustment: this value can be adjusted to reduce weld spatter.
Adjustable: Burn Back, Hot Start, Wire approach speed.
Welding modes: 2T / 4T / spot / stich.
Predisposition for use of spool gun or potentiometer torches.
MMA
Adjustable Arc Force.
Adjustable Hot Start.
Automatic Anti-sticking: allows you to easily detach the electrode if it remains glued to the piece.
TIG
TIG with Lift ignition.