Hover to zoom
Compact wheeled wire welder. Sturdy and durable, it is the ideal choice for heavy carpentry work, piping, repairs and maintenance.
It meets the needs of intensive welding of the craftsman and small industry and is guaranteed by the LAB mark of excellence. Designed and built with care at our factories in San Marino.
The Simple Weld synergic digital control makes the welder s job easier. It is sufficient to set one of the simergic programs through the control panel and the microprocessor manages the wire speed, the initial ramp and the burn back in synergy with the other settings of the welding machine.
The D-mig 635 TD LAB adjustment is very simple and allows you to weld many metals such as: steel, stainless steel, aluminum etc.
The D-mig 635 TD LAB delivers 350 Amps and can receive wires with a diameter from 1.2 to 1.6 mm. The power supply voltage is three-phase at 230/400 Volt.
The main features of the D-mig 635 TD LAB model are:
Synergic or manual welding.
Ammeter and digital voltmeter.
Welding in 2T / 4T mode.
Continuous welding, spot, stich.
Sub-menu for adjusting the secondary parameters: burn back, soft start ramp, pause time in stich mode.
It houses wire spools with a diameter of 200 - 300 mm.
Wire feeder with 4 geared rollers diameter 30 mm.
Torch with EURO connection.
Thermostatic protection.
Forced ventilation.
Trolley with front and rear wheels, rear cylinder holder for 50 L cylinders.
Torch holder.Welding current range (Amp): 25 - 350A
Welding positions (N°): 10
Duty Cycle (Amp) (EN 60974-1 40°C): 270A - 32%
200A - 60%
Open circuit voltage (Volt): 17 - 41V
Input voltage (50/60 Hz): 3 Ph - 230/400V
Absorbed power 60% / Max: 5,5 / 8,5 kW
Fuse (Amp): 25 / 16A
Steel wire (Ø mm): Ø 0,8 - 1,0 - 1,2 - 1,6 mm
Stainless steel wire (Ø mm): Ø 0,8 - 1,0 - 1,2 - 1,6 mm
Al.Mg - Al.Si wire (Ø mm): Ø 1,0 - 1,2 - 1,6 mm (Al.Mg 5 - Al.Si 5)
Self shielded wire (mild teel) (Ø mm): Ø 1,2 - 1,6 mm (MANUAL)
Self shielded wire (mild teel) (Ø mm): 1,2 - 1,6 (With gas)
Wire Suitable Spool: Ø 200 - 300 mm
Wire feeder: 4 geared rollers
Output connection: DX 70 mm2 / Euro
Thermostatic Protection: yes
Weight kg ≅: 91
Dimensions (mm): 877 x 540 x 1025
FEATURES: :
Manual welding: yes
Synergic welding: yes
Synergic / Simple Weld: yes
2T / 4T: yes
Spot: yes
Stitch: yes
Soft Start: yes
Burn back: yes
Ammeter / Voltmeter: yes
LOGISTIC INFO CODE: 262600
Barcode: 8011399026207
Package dimension, Wid.-Dep.-Height (mm): 825 x 435 x 840
Package weight kg: 97.5
Pieces for pallet: 5
| Item Code | DECAWMDM635TD |
|---|---|
| Barcode | 8011399026207 |
| Brand | DECA |
1. Connect the machine to a 3-phase 230/400V power supply.
2. Install the correct wire spool (200–300 mm) and connect shielding gas.
3. Choose welding mode: Synergic (automatic) or Manual.
4. Select the appropriate program for the material type.
5. Adjust current and fine-tune secondary parameters if required.
6. Select 2T or 4T mode depending on welding operation.
7. Start welding and maintain steady torch movement.
8. After use, switch off and allow the machine to cool.
The DECA D-MIG 635TD is a professional synergic MIG welding machine designed for efficient welding of steel, stainless steel, and aluminum. It is ideal for industrial, workshop, and maintenance applications requiring precision and ease of use.
- Output current up to 350A for industrial applications
- Synergic (Simple Weld) and manual welding modes
- Digital control with ammeter and voltmeter display
- Wide current range: 25 – 350A
- 4-roller geared wire feeder for stable wire feeding
- Supports wire sizes from 0.8 mm to 1.6 mm
- 2T / 4T, spot, and stitch welding modes
- Adjustable parameters: burn back, soft start, stitch timing
- Compatible with steel, stainless steel, aluminum, and flux-cored wires
- EURO torch connection
- Thermostatic protection and forced ventilation
- Heavy-duty trolley with cylinder holder and torch support
The DECA D-MIG 635TD simplifies welding with its synergic control system, automatically adjusting parameters for optimal performance. It combines precision, flexibility, and durability, making it ideal for professionals handling different materials and applications.
- Professional welders and fabricators
- Industrial workshop operators
- Automotive and body repair specialists
- Maintenance and repair technicians
- Users needing precise and automated welding control
- Metal fabrication workshops
- Automotive repair and body shops
- Industrial manufacturing plants
- Construction and engineering projects
- Maintenance and repair facilities
Synergic welding automatically adjusts parameters like voltage and wire speed based on selected material and thickness.
The machine delivers up to 350A output current.
It supports wire sizes from 0.8 mm to 1.6 mm.
Yes, it supports self-shielded wire in manual mode.
Yes, it is designed for professional and industrial welding applications.
No reviews yet. Be the first to review this product!
